Crane beam I Piezo
- Installation unit with piezo push button for cold or mixed water,
with impulse valve, closes with little or no recoil, voltage: 12 V
(excluding transformer), with pipes and drain DN 15, with flow
limiter and strainer. Excluding fixation material.
Water supply: ¾”. Special versions and legionella filter possible on demand. - Material:
Stainless steel 18/10, type AISI 304, brushed finishing - Dimensions:
Length: see article number
H 200 x D 100 mm, tip to wall distance ca 172 mm - Comments:
Special versions on demand
Legionella filter on demand - Technical piezo buttons:
The water runs for 30 sec. or for an adjustable time between
5-100 sec. With remote control (not supplied) and interruptible
(start/stop function).
Hygiene rinsing: 48 hour rinsing, standard setting
Connection: see underneath
Description
| Art. | Description |
|---|---|
| Piezo button, cold/mixed water | |
| 478120 | Crane beam I piezo: 1200 mm, 2 places 600 mm |
| 478140 | Crane beam I piezo: 1400 mm, 2 places 700 mm |
| 478180 | Crane beam I piezo: 1800 mm, 3 places 600 mm |
| 478210 | Crane beam I piezo: 2100 mm, 3 places 700 mm |
| Connection | |
|---|---|
| 478001 | Crane beam I piezo: G ¾ side left, electricity right |
| 478002 | Crane beam I piezo: G ¾ top left, electricity right |
| 478003 | Crane beam I piezo: G ¾ back left, electricity right |
| 478004 | Crane beam I piezo: G ¾ side right, electricity left |
| 478005 | Crane beam I piezo: G ¾ top right, electricity right |
| 478006 | Crane beam I piezo: G ¾ back right, electricity right |