Crane beam 2 with piezo and thermostat
Drawing:
- Installation unit, with piezo push buttons for cold and warm water,
with impulse valve, closes with little or no recoil, voltage: 12 V
(excluding transformer), with pipes and drain DN 15, with flow regulator
and strainer. Excluding fixation material. Water supply: ¾”. - For other technical specifications check crane beam I with Piezo.
- Material:
Stainless steel 18/10, type AISI 304, brushed finishing - Dimensions:
Length: see article number
H 200 x D 100 mm, tip to wall distance ca 172 mm - Comments:
special versions on demand
Legionella filter on demand - Technical piezo buttons:
The water runs for 30 sec. – or for an adjustable
time between 5-1000 sec. With remote control (not
supplied) and interruptible (start/stop function).
Hygiene rinsing: 48 hour rinsing, standard setting
Connection: see underneath
Description
| Art. | Description |
|---|---|
| Piezo button and thermostat, cold/warm water | |
| 479120 | 1200 mm, 2 places of 600 mm |
| 479140 | 1400 mm, 2 places of 700 mm |
| 479180 | 1800 mm, 3 places of 600 mm |
| 479210 | 2100 mm, 3 places of 700 mm |
| Connection | |
| 479001 | G 3/4 B side left, electricity right |
| 479002 | G ¾ top left, electricity right |
| 479003 | G ¾ back left, electricity right |
| 479004 | G ¾ side right, electricity left |
| 479005 | G ¾ top right, electricity right |
| 479006 | G ¾ back right, electricity right |